ITT
Skip to content

About D.C. Diaphragm Pumps

Self-priming, dry running

Multiple diaphragm PAR-MAX pumps from JABSCO are compact, quiet and durable. Self-priming is rapid, the bilge can be pumped virtually dry, and the pump is not harmed by dry running.

Discharge heads should not exceed 3-4 metres for any of these pumps. They are supplied with an inlet strainer to keep out solids big enough to interfere with the pump's valves.

warning.gif (455 bytes)
No Jabsco pump should be used for petrol, solvents or any liquid with a flash point below 37oC( 98oF)

Basket

British Pound - GBP
Your basket is empty.

Add multiple items...



JabscoShop is operated by Cleghorn Waring which is a division of ITT Industries. Registered England No. 853597. Registered Office: Jays Close, Viables Estate, Basingstoke, Hants, RG22 4BW

© 2010 Cleghorn Waring. All rights reserved.

urltype=6§ionid=13&totype=ARTICLETYPE&toid=86&pagetemplateid=3&articletypeid=86&language=en&subfolder=%2fjabscoshop-about-dc-diaphragm-pumps§ionname=Advice+%26+Support&brandid=2
Page as at 01 August 2010 04:32:30.